AnkerSolix

Standard Procedure for Switching from Wi‑Fi/Ethernet to 4G Communication

This device has used a 4G dongle before. You just need to plug the new 4G dongle directly into the device.

This device has not used a 4G dongle before. You need to use the Anker SOLIX Professional App, connect to the device via Bluetooth, and follow the 4G network setup procedure.

2.1 Find this site on the main interface

2.2 After entering the site, select “Commission”

2.3 Redo "Connect Device" and "Configure System Network"

2.3.1 Connect Device

Connect the power module to the Anker SOLIX Professional app via Bluetooth.

1）Go to Storage Settings.

2）Select the power module from the Bluetooth device list or scan the barcode on the power module's label.

3）Enter the password located below the barcode.

2.3.2 Configure System Network

Configure the Internet connection using 4G.

55 undefined

Labor Reimbursement (Service Rebate) Guidelines of Anker SOLIX X1 AC-Coupled Solution - US

Return Merchandise Authorization Procedure of Anker SOLIX X1 AC-Coupled Storage & Solar Solution

Technology Review Report for US Anker SOLIX X1 Energy Storage System

Anker SOLIX X1 Home Energy Storage System Flyer - US

Anker SOLIX X1 Home Energy Storage System Three Fold Leaflet - US

IEEE 2030.5 Certificate of Anker SOLIX X1 Power Module-US

Anker SOLIX X1 Experience Extreme Off-Grid Performance (US)

Anker SOLIX X1 Innovative Energy Optimizer (US)

Anker SOLIX X1 AC- Coupled Commissioning Guide(US)

Anker SOLIX X1 AC- Coupled Installation Guide(US)

Anker SOLIX X1: Introduction & Unboxing Guide

Anker SOLIX X1 Wiring Guide(US)