1. Equipment can be installed indoors or outdoors without special requirements up to 300 m (984 ft) away from the coast.

2. Precautions need to be taken if equipment is installed within 50 to 300 m (164 to 984 ft) from the coast.

   1. Recommended Installation: Indoor installation should be prioritized, relying on enclosed or semi-enclosed spaces.

   2. Semi-Enclosed Exception: If the space directly faces the ocean, effective barrier structures must be installed between the equipment and the sea to block marine airflow.

   3. Outdoor Installation: This is only permitted when indoor installation is not possible. The following protective measures must be implemented:

      1. A physical protective structure must be constructed to shield the equipment from sea breezes. The machine must be placed between 40 and 100 cm (15.7 and 39.4") away from the structure.

      2. The top of the equipment must be covered to avoid vertical ocean airflow.

3. Installation is prohibited within 50 m (164 ft) of the coast due to high salt fog concentration, intense corrosion, and climate conditions, which violate operational safety standards.

Note:

Any operational environment must be properly ventilated to dissipate heat. Installation must strictly adhere to the technical parameters for spatial clearance, outlined in the product manual. Maintain a minimum safe distance from surrounding obstructions to improve heat dissipation and prolong equipment life.