Standard Procedure for Switching Wi‑Fi Communication to Wired (Ethernet) Communication
From the power station's main screen, select the settings button in the upper right to access Settings.
Then, tap WLAN.
Follow Step 1 and connect your phone to the device via Bluetooth.
Once your phone is connected via Bluetooth, proceed to Step 2. On the Select Wi-Fi screen, the previously connected network will be displayed. Enter any incorrect password to disconnect from the previous Wi-Fi network.
Connect the Ethernet cable from the router’s LAN port to the Ethernet port on the Wi-Fi dongle.
5.1 Insert the Ethernet cable.
5.2 Tighten the protective cover of the Ethernet port.
