Here is a photo of the LCD screen for the Anker 767 Power Station:

1. Current Output Power 

2. Current Input Power 

3. IoT 

Press the IoT button for 2 seconds and connect your devices through the app when this icon appears on the screen. 

4. Remaining Battery for Expansion Battery 

This icon appears on the screen when the expansion battery is connected successfully. 

5. USB-A Output Port 

6. USB-C Output Port 

7. Car Charging 

8. AC Charge and Voltage Frequency

9. Low-Temperature Alert 

When this icon shows, stop using the power station until the icon disappears. 

10. High-Temperature Alert 

When this icon shows, stop using the power station and let it cool down until it disappears. 

11. Overload Warning 

This icon appears when a port is overloaded. The port will be turned off to avoid any damage. Please remove the device causing overload. 

12. Estimated Time to Fully Recharge 

13. Estimated Time for Battery to Deplete 

14. Remaining Battery for Power Station 

15. Power Saving Mode

If you have any questions, please contact us for further assistance.