A. Connect Anker SOLIX Solarbank E1600 to Microinverter and the balcony photovoltaic panels
Single Solarbank
1. Connect Solarbank to the micro-inverter using the included MC4 Y output cables.
2. Connect the micro-inverter to a home outlet using the original cable.
3. Connect the solar panels to Solarbank using the included solar panel extension cables.
Cascaded Solarbanks
Only two Solarbanks can be cascaded to double the capacity to 3,200 Wh.
1. Connect each Solarbank to the micro-inverter using the included MC4 Y output cables.
2. Connect the micro-inverter to a home outlet using the original cable.
3. Connect solar panels to Solarbanks using the included solar panel extension cables.
Before connecting cables, ensure that the micro inverter, solar panels, and the home grid are disconnected, and Solabank is turned off.
B. Turn on the Anker SOLIX Solarbank E1600
- Long press the main switch button 2s
- Power-on light display: 4 white and 1 green lights flash 3 times and enter the power display and pair network status respectively
C. Download the following APP
D. Pair Network
Just do the pair network operation according to the instructions on the screen:
- Connect to the Internet
- Establish a home system
- Transfer energy
- Check energy data
If you have any questions, please contact us for further assistance.
