Please follow the steps below. Note: Anker SOLIX Generator Input Adapter cannot be used while the grid is connected. If the adapter is used, the status indicator will be red.

1. Turn off your 240V generator and the circuit breaker that controls the Home Power Panel port connected to Anker SOLIX Generator Input Adapter.

2. Connect Anker SOLIX Generator Input Adapter to Home Power Panel via the Home Power Panel port.

3. Connect Anker SOLIX Generator Input Adapter to the generator via the NEMA L14-30P port. If the generator's output port is NEMA L14-50, purchase a NEMA L14-30R to L14-50P adapter.

4. Turn on the generator. The Anker SOLIX Generator Input Adapter status indicator should be white, indicating normal operation.

When Anker SOLIX Home Power Panel is connected to F3800 Plus and 240V generator, excess generator power can charge F3800 Plus.

If you have any questions, feel free to contact us for further assistance.