Yes. Anker SOLIX Solarbank 4 E5000 Pro supports multi-unit parallel connection and offers two configuration methods. You can choose the one that best suits your setup based on the number of devices and installation conditions:

1. DIY Parallel Mode

- Within the same system, up to 3 Solarbank 4 E5000 Pro units may be connected in parallel.

- Installation Note: To ensure electrical safety and grid balance, it is strongly recommended that each of the 3 units be connected to a separate dedicated circuit within the property's three-phase supply.

- System Limits: Maximum grid-connected AC output of 7,500W, PV input of 15kW, and total system capacity of 90kWh.

2. Power Dock Mode

- Installation Requirements: ⚠️ Must be installed and connected to the grid by a qualified electrician.

- Applicable Scenarios: If you own multiple units (such as multiple Solarbank 4 units, or deploying mixed installation with earlier-generation models like Solarbank 3 E2700 Pro / Solarbank 2 E1600 Pro), you can choose Anker SOLIX Power Dock. It is suited for installations with complex grid-compliance requirements, high AC output demands, and multi-unit compatibility needs.

- System Limits: It supports up to four units in parallel, with a maximum AC output of 9.6kW, PV input of 20kW, and total system capacity of 120kWh.

If you have any questions, feel free to contact us for further assistance.