Details
Related Articles
Manuals & Downloads
Support Videos
eufyCam S4 - Power and Battery Specifications

Battery Type

The eufyCam S4 is equipped with a 10,000mAh lithium-ion rechargeable battery, designed for long-lasting performance and optimized energy efficiency.

 

Theoretical Battery Life

Under standard usage conditions, the eufyCam S4 delivers a theoretical battery life of up to 180 days based on an average of 600 seconds of recording per day. However, when used solely on battery power, the integrated solar panel can help maintain continuous operation, enabling “forever power” in optimal sunlight conditions.

Note: Actual battery life may vary depending on factors such as the frequency of motion detection, recording duration, operating mode, and environmental conditions.

 

Why is my eufyCam S4’s actual battery life shorter than expected?

Please be aware that your eufyCam S4’s battery performance is influenced by several variables, including:

  • Camera settings and power mode.

  • Motion detection frequency and sensitivity.

  • Recording duration per event.

  • Environmental temperatures.

  • Sunlight exposure for solar charging.

To help maximize battery life, consider the following best practices:

  1. Select Battery Life Mode for optimized performance.

  2. Set motion detection to “Human Only.”

  3. Reduce motion detection sensitivity if possible.

  4. Enable Activity Zones to minimize unnecessary recordings.

  5. Adjust camera positioning to ensure the solar panel receives adequate sunlight.

  6. Add an external solar panel or use a removable battery for extended runtime.

  7. Disable the snapshot feature if not needed.

 

Charging Time

Using a 5V/2A charger, the eufyCam S4 takes approximately 7–8 hours to fully charge.

 

Charging Methods

Each eufyCam S4 ships with the battery pre-charged to approximately 40%-80%.

For recharging, we recommend using:

  • A 5V/2A or 5V/1A USB charger.

  • The included USB charging cable.

  • Optionally, a removable battery pack (sold separately) for quick battery swaps.

 

Charging Troubleshooting

If your camera is not charging:

  • Ensure you are using the original USB cable and a 5V/2A or 5V/1A charger.

  • Verify that the camera’s LED indicator is solid blue.

  • Confirm charging status via the eufy app.

  • Make sure the ambient temperature is within the supported range: 0℃ to 45℃ (32℉ to 113℉). Please note that the camera cannot be charged outside this temperature range.

 

If you have any other questions regarding the eufyCam S4, please don't hesitate to contact us for assistance.

eufyCam S4 - Power and Battery Specifications
Download
Applicable for those products :
Resolved
Unresolved
Copied
0 Results
Manuals & Downloads
A3961 QSG V2(1)
Download
Liberty 4_A3953_QSG
Download
Q20i_QSG
Download
EU Declaration of Conformity for soundcore A3i_A3992
Download
UK&CA Declaration of Conformity for soundcore Liberty 4_A3953
Download
EU&UK Declaration of Conformity for soundcore Sleep A10_A6610
Download
A3947_Liberty 4 NC_QSG
Download
EU Declaration of Conformity for soundcore Liberty 4_A3953
Download
A6610_soundcore_Sleep_A10_QSG
Download
A3947_Liberty 4 NC_User Manual
Download
Support Videos
How to use Liberty 4 Wellness features
How to Connect to the Soundcore App and Update Firmware for Sport X10
How to Wear Liberty 4 and Change Eartips
How to solve a connection issue on Sleep A10
How to Use Features On the Soundcore App for Sport X10
How to Pair and Reset Sport X10
How to use soundcore VR P10
How to Pair soundcore Frames with a New Device
How to Wear Soundcore Sport X10 Correctly
How to use squeeze control on Liberty 4