Details
Related Articles
Manuals & Downloads
Support Videos
Why does the WetVac W31 make loud noises when it is in the self-cleaning process?

The self-cleaning noise level of this vacuum is approximately 72dB, which is relatively low compared to similar products in the industry.

When the WetVac is self-cleaning, the rotating speed of the roller brush can reach up to 2500r/min to clean the roller brush thoroughly. Therefore, it is absolutely normal for the WetVac to emit noises when it is in the self-cleaning process. Although the sound will not affect your daily life, it is recommended to place the WetVac's charging stand at a location in your home that does not disturb your rest, or after using the vacuum, choose a time that does not interfere with your rest to recharge it.

 

If you still need further assistance, please email eufy support.

Applicable for those products :
Resolved
Unresolved
Copied
0 Results
Manuals & Downloads
A6610_soundcore_Sleep_A10_QSG
Download
A3961 QSG V2(1)
Download
Liberty 4_A3953_QSG
Download
Q20i_QSG
Download
EU Declaration of Conformity for soundcore A3i_A3992
Download
UK&CA Declaration of Conformity for soundcore Liberty 4_A3953
Download
EU&UK Declaration of Conformity for soundcore Sleep A10_A6610
Download
A3947_Liberty 4 NC_QSG
Download
EU Declaration of Conformity for soundcore Liberty 4_A3953
Download
A3947_Liberty 4 NC_User Manual
Download
Support Videos
How to use Liberty 4 Wellness features
How to Connect to the Soundcore App and Update Firmware for Sport X10
How to Wear Liberty 4 and Change Eartips
How to solve a connection issue on Sleep A10
How to Use Features On the Soundcore App for Sport X10
How to Pair and Reset Sport X10
How to use soundcore VR P10
How to Pair soundcore Frames with a New Device
How to Wear Soundcore Sport X10 Correctly
How to use squeeze control on Liberty 4