The X10 Pro Omni is an advanced cleaning robot vacuum equipped with an intelligent Mopping function designed to maintain the cleanliness of your floors with ease. This article provides a comprehensive guide on how to use the Mopping function of the X10 Pro Omni, including details on water tank capacity, duration, and estimated cleaning area coverage.
Water Tank Capacity and Coverage
Under the default settings, the X10 Pro Omni's 3L clean water tank, when filled to the MAX mark, is capable of cleaning an area of approximately 1,500 to 2,000 square feet. This coverage area can be cleaned up to three times, offering thorough and optimal cleaning results for most homes.
Mop Washing Frequency Settings
An important aspect of the X10 Pro Omni's Mopping function is the mop washing frequency setting. This setting determines how often the robot vacuum will rinse and clean the mops, which directly affects the total water consumption from the clean water tank.
You can also pre-set how often the robot automatically returns to the Omni Station and wash the mops during the robot vacuum's cleaning cycle.
By Room: Based on the division of rooms on the map, the robot will automatically wash the mops before mopping the next room.
By Duration (min): The robot will automatically return to the Omni Station and wash the mops according to the pre-set time between 15 to 25 minutes.
By default, the robot vacuum will wash the mops every 20 minutes, but adjusting this setting to a 15-minute mop washing frequency can ensure that the mops can remain cleaner throughout the robot vacuum's cleaning cycle.
However, it should be noted that increasing the mop washing frequency could lead to a decrease in the overall area cleaned per water refill. This is due to the robot vacuum needing to consume more water to frequently wash the mops, thereby depleting the water tank more rapidly.
Operating Instructions
- Fill the clean water tank up to the MAX mark with tap water.
- Power on the X10 Pro Omni and select the Mopping function.
- Adjust the mop washing frequency according to your preference. For mops to remain cleaner during the robot vacuum's cleaning cycle, it is recommended to set the frequency to 15 minutes; for less water consumption, keep it at the default 20 minutes.
- Start the robot vacuum from the Omni Station to begin its cleaning cycle.
- Monitor the water level and refill the clean water tank as necessary to continue cleaning more areas.
The X10 Pro Omni is designed to provide a hassle-free cleaning experience, with a large water tank and customizable settings to suit different cleaning needs. By following the instructions above, you can ensure that your floors are thoroughly cleaned with minimal effort and water usage.
Remember to monitor the water level in the tank and refill it as needed, depending on the size of your home and the frequency of cleaning sessions. When the robot finishes cleaning, it will auto-clean and auto-dry the mops. The mops are washed after cleaning and are dried with 40°C hot air to prevent the build-up of bacteria, so the mops are ready for a new cleaning cycle. With the X10 Pro Omni, you can enjoy sparkling clean floors with the convenience of modern technology!
If you have any further questions, please don't hesitate to contact us for assistance.
