How to Set Static IP for Network Attached Storage (NAS)
When using NAS as the video storage option, please refer to the following steps to set your camera’s IP address to static IP address. The specific path to set a static IP address may be different depending on your router’s make and model, please refer to the router’s user manual for detailed instructions.
1. Check your device’s IP address and MAC address using the eufySecurity app by going to HomeBase Settings > About Device > IP Address and MAC Address.
2. Log in to your router settings and select DHCP server > Select Client List > Find the corresponding device that you want to set a static IP address > Copy MAC address.
3. Select Static address distribution menu > Select Add > Paste the MAC address and input the IP address > Select Save > Restart the router to update the configuration.
4. After restarting the router, check the device information to ensure its IP address has been updated to a static IP address. If it has not been updated, please restart the camera.
Note: Currently, the only NAS brand supported by eufy is Synology. Additionally, the camera's live stream resolution when using NAS is limited to 1080P even if the camera supports 2K resolution.
If you still have questions regarding how to set a static IP address when using NAS, please contact us for further assistance.
Applicable for those products :
Resolved
Unresolved
Copied
0 Results
Manuals & Downloads
A6610_soundcore_Sleep_A10_QSG
Download
A3961 QSG V2(1)
Download
Liberty 4_A3953_QSG
Download
Q20i_QSG
Download
EU Declaration of Conformity for soundcore A3i_A3992
Download
UK&CA Declaration of Conformity for soundcore Liberty 4_A3953
Download
EU&UK Declaration of Conformity for soundcore Sleep A10_A6610
Download
A3947_Liberty 4 NC_QSG
Download
EU Declaration of Conformity for soundcore Liberty 4_A3953
Download
A3947_Liberty 4 NC_User Manual
Download
Support Videos
