Details
Related Articles
Manuals & Downloads
Support Videos
How to Connect the Solar Panel to Your SoloCam S340/E30

💡 If the camera is blocked, install the solar panel independently and use the provided USB-C extension cable to get strong solar power. The camera can be mounted on a wall or on the ceiling. 

 

1. Drill holes with a 15/64 inch (5.95 mm) drill bit with the provided positioning card, then insert the anchors into the holes. 

 

 

2. Connect the solar panel to the camera using the provided USB-C extension cable. 

3. Firmly secure the camera onto the mounting bracket. 

 

 

📌Be careful not to install by mistake. 

 

4. Install the mounting bracket of the solar panel in a suitable position. 

 

 

5. Install the solar panel onto its mounting bracket by turning it, then adjust the angle (20º~30º recommended). 

 

 

6. Check the solar charging dashboard on the App 

 


If you have any other questions about the SoloCam S340/E30, please don't hesitate to reach out to us for further assistance.

Applicable for those products :
Resolved
Unresolved
Copied
0 Results
Manuals & Downloads
A6610_soundcore_Sleep_A10_QSG
Download
A3961 QSG V2(1)
Download
Liberty 4_A3953_QSG
Download
Q20i_QSG
Download
EU Declaration of Conformity for soundcore A3i_A3992
Download
UK&CA Declaration of Conformity for soundcore Liberty 4_A3953
Download
EU&UK Declaration of Conformity for soundcore Sleep A10_A6610
Download
A3947_Liberty 4 NC_QSG
Download
EU Declaration of Conformity for soundcore Liberty 4_A3953
Download
A3947_Liberty 4 NC_User Manual
Download
Support Videos
How to use Liberty 4 Wellness features
How to Connect to the Soundcore App and Update Firmware for Sport X10
How to Wear Liberty 4 and Change Eartips
How to solve a connection issue on Sleep A10
How to Use Features On the Soundcore App for Sport X10
How to Pair and Reset Sport X10
How to use soundcore VR P10
How to Pair soundcore Frames with a New Device
How to Wear Soundcore Sport X10 Correctly
How to use squeeze control on Liberty 4