Please follow the steps listed below to set up your PoE NVR Security System:

1. Connect the PoE switch to one of the PoE ports on the NVR central hub, and then connect the PoE camera to the PoE switch. You can also connect the PoE camera directly to any of the PoE ports on the NVR central hub.

2. Connect your router to the LAN port on the NVR central hub.

Note: Do not connect other network devices to the PoE ports on the NVR central hub, as this may interfere with the network configuration.

3. Check the LAN LED indicator. When the PoE NVR Security System establishes a successful network connection through RJ45, the LED indicator will display a solid blue light. On the other hand, the LED indicator will display a solid red light or remain off.

Note: When the network cable is initially connected, the LAN LED indicator will display a flashing blue light.

If you have any other questions about the PoE NVR Security System, please don't hesitate to contact us for further assistance.